Start printing in a day, not a month.
Ten beginner-friendly prints + eight guides, no fluff. Pick a model, follow the guide, get a part in your hand.
What you'll learn
First print, start to finish
Slice a model, send it to the printer, watch the first layer, and remove the finished part. In 20 minutes on a beginner machine.
When it goes wrong
Stringing, warping, layer separation — each failure has one root cause and one fix. The common-failures guide maps symptom to setting.
Pick a model you'll finish
Every model here is license-clean, beginner-friendly, and teaches one specific skill. No exotic filament, no enclosed enclosure required.
Featured models
All models →
3DBenchy — The Jolly 3D Printing Torture Test
The industry-standard first print. Tests curved surfaces, overhangs, bridges, and fine detail all in one compact boat-shaped model.
Cute Mini Octopus
A small octopus figurine with curving tentacles. The model page offers a version with built-in tree supports — practice enabling, generating, and removing supports.
Flexi Rex with Stronger Links
An articulated T-Rex that flexes and moves without glue or assembly. The joints are printed in place — a showcase of what FDM can do that injection moulding can't.
Low Poly Dog
A low-poly faceted dog figurine. The key lesson: print it upside-down (legs up) to eliminate all overhangs and avoid needing supports.
Spiral Vase Rose
A rose-shaped vase printed in vase mode — a single continuous spiral wall with no infill. Teaches the spiralize/vase mode slicer setting.